Forthcoming papers

Announcements

Preliminary course programme international centre for mechanical Sciences     

Isochronism defect for various doubly rotated cut quartz resonators

It has been shown in earlier works that the amplitude-frequency effect [also called isochronism defect (ID) or anisochronism] could be a limitation factor on ultrastable oscillators. Theoretical studies based on the nonlinear theory of piezoelectricity have already been developed to explain the amplitude-frequency effect. So, it is possible to estimate the dependence of the ID versus various parameters of the resonator design (overtone rank, radius of curvature, electrodes diameter, etc.). However, because of the lack of available fourth-order elastic coefficients, it is not possible to predict the ID of any resonant frequency of a given trapped energy resonator. To tentatively find orientations of plates exhibiting a quasi- ID, we have realized electroded resonators with different orientations and curvatures. We present results that verify, particularly, the R/sup -1/2/ dependence of the amplitude-frequency effect versus radius of curvature. Moreover, we show that the ID can be positive or negative, that it can vary from one orientation to other one of about one order of magnitude, and that there exists a thermal compensated mode for which the amplitude-frequency effect is .     

Competition through selective inhibitory synchrony

Models of cortical neuronal circuits commonly depend on inhibitory feedback to control gain, provide signal normalization, and selectively amplify signals using winner-take-all (WTA) dynamics. Such models generally assume that excitatory and inhibitory neurons are able to interact easily because their axons and dendrites are colocalized in the same small volume. However, quantitative neuroanatomical studies of the dimensions of axonal and dendritic trees of neurons in the neocortex show that this colocalization assumption is not valid. In this letter, we describe a simple modification to the WTA circuit design that permits the effects of distributed inhibitory neurons to be coupled through synchronization, and so allows a single WTA to be distributed widely in cortical space, well beyond the arborization of any single inhibitory neuron and even across different cortical areas. We prove by nonlinear contraction analysis and demonstrate by simulation that distributed WTA subsystems combined by such inhibitory synchrony are inherently stable. We show analytically that synchronization is substantially faster than winner selection. This circuit mechanism allows networks of independent WTAs to fully or partially compete with other.     

Metallic Nanowire Coupled CsPbBr3 Quantum Dots Plasmonic Nanolaser

Plasmonic nanolasers provide a valuable opportunity for expanding sub-wavelength applications. Due to the potential of on-chip integration, semiconductor nanowire (NW)-based plasmonic nanolasers that support the waveguide mode attract a high level of interest. To date, perovskite quantum dots (QDs) based plasmonic lasers, especially nanolasers that support plasmonic-waveguide mode, are still a challenge and remain unexplored. Here, metallic NW coupled CsPbBr₃ QDs plasmonic-waveguide lasers are reported. By embedding Ag NWs in QDs film, an evolution from amplified spontaneous emission with a full width at half maximum (FWHM) of 6.6 nm to localized surface plasmon resonance (LSPR) supported random lasing is observed. When the pump light is focused on a single Ag NW, a QD-NW coupled plasmonic-waveguide laser with a much narrower emission peak (FWHM = 0.4 nm) is realized on a single Ag NW with the uniform polyvinylpyrrolidone layer. The QDs serve as the gain medium while the Ag NW serves as a resonant cavity and propagating plasmonic lasing modes. Furthermore, by pumping two Ag NWs with different directions, a dual-wavelength lasing switch is realized. The demonstration of metallic NW coupled QDs plasmonic nanolaser would provide an alternative approach for ultrasmall light sources as well as fundamental studies of light matter interactions.     

Optical modeling of organic solar cells based on CuPc and C60

We have investigated the influence of the poly(3,4-ethylenedioxythiophene)-blend-poly(styrene-sulfonate) (PEDOT:PSS) layer on the short-circuit current density (J(sc)) of single planar heterojunction organic solar cells based on a copper phthalocyanine (CuPc)-buckminsterfullerene (C(60)) active layer. Complete optical and electrical modeling of the cell has been performed taking into account optical interferences and exciton diffusion. Comparison of experimental and simulated external quantum efficiency has allowed us to estimate the exciton diffusion length to be 37 nm for the CuPc and 19 nm for the C(60). The dependence of short-circuit current densities versus the thickness of the PEDOT:PSS layer is analyzed and compared with experimental data. It is found that the variation in short-circuit current densities could be explained by optical interferences.     

Hydrophilization by coating of silylated polyoxazoline using sol–gel process

Hybrid films prepared from TEOS and polyoxazolines (Si–POx–Si) crosslinking agents were coated on different substrates in order to modify their surface properties. The film cohesion and adhesion on substrates were expected through the hydrogen bonding of the polyoxazoline crosslinked network. Low molecular-weight α,ω-unsaturated polyoxazolines (DA-PMOx)s were synthesized by a one step cationic ring-opening polymerization (CROP) of 2-methyl-2-oxazoline (MOx) with a good control over the molecular weight. Based on double thiol-ene coupling (d-TEC) a post-functionalization of DA-PMOx end chains gave in good yield polyoxazoline cross linker (Si–POx–Si). Glass and various polymer substrates (PP, PEI, POM, etc.) were spin coated by the organic–inorganic hybrid films through sol–gel process. AFM, SEM, visible reflectance spectroscopy and contact angle experiments allowed the full characterization of targeted surfaces and demonstrated the efficiency of the polyoxazoline coating.     

Development of an improved falling ball viscometer for high-pressure measurements with supercritical CO2

This study presents the development of an improved technique for viscosity measurements under high pressure. The apparatus is based on the principle of the falling ball viscometer, implemented in a high-pressure autoclave fitted with visualisation windows. The originality here is that the balls fall through a tube open at both ends with a diameter slightly greater than that of the balls, allowing a simplified modelling and numerical simulation. A numerical approach has been used for viscosity determination. Calculations have been made with COMSOL Multiphysics^® with the laminar Navier-Stokes model for Newtonian mixtures. It includes the specific hydrodynamic effects without the need for a calibration fluid. However, validation experiments were carried out at atmospheric pressure with dimethylsulfoxide (DMSO) at 298, 308 and 318 K and with cocoa butter at 313 and 353 K, with values of viscosity in the range from 1.4 to 45.4 mPa s. Comparative measurements with literature data have been conducted with cocoa butter saturated with carbon dioxide at 313 and 353 K and for pressures ranging from 0.1 to 25 MPa. At 313 K, viscosity varies from 45.4 mPa s to 3.1 mPa s while at 353 K it varies from 12.4 to 1.9 mPa s. For both isotherms tested, within the range 0-15 MPa, the higher the CO₂ dissolution in the cocoa butter, the lower the viscosity. However, this decrease in viscosity is more pronounced at the lowest temperature. Above 15 MPa the CO₂ dissolution effect on viscosity becomes insignificant, i.e. within the experimental error, due to a counter effect linked with the high hydrostatic pressure. Furthermore, the limits of use of this method have been determined. This technique is revealed as reliable and can therefore be used with other binary systems.     

Characterisation of the spoilage microbiota in raw salmon (Salmo salar) steaks stored under vacuum or modified atmosphere packaging combining conventional methods and PCR-TTGE

In order to characterise the spoilage related to microbiota of raw salmon, a combination of culture-dependent and -independent methods, including PCR–TTGE, was used to analyse 3 raw salmon batches stored for 3 days at chilled temperature in modified atmosphere packaging (MAP) (50% CO₂/50% N₂) or under vacuum. Sensory evaluation, microbiological enumeration and chemical analysis were performed after 3, 7 and 10 days of storage. At the onset of spoilage, 65 bacterial isolates were picked from the plates. Thus, 13 different genera or species were identified by phenotypic and molecular tests: Serratia spp., Photobacterium phosphoreum, Yersinia intermedia, Hafnia alvei, Buttiauxella gaviniae, Pseudomonas sp., Carnobacterium maltaromaticum, Carnobacterium divergens, Lactococcus piscium, Lactobacillus fuchuensis, Vagococcus carniphilus, Leuconostoc gasicomitatum and Brochothrix thermosphacta. The PCR–TTGE profiles and band identification enabled a shift of the dominant populations during the storage to be visualised for all the batches, probably due to the temperature change and the packaging. At the beginning of storage, Pseudomonas sp. dominated the raw salmon microbiota while in the following days (7 and 10), P. phosphoreum and L. piscium were identified as the main bacterial groups. This study enhances the knowledge of MAP and vacuum-packed raw salmon spoilage microbiota.     

Sensory and physicochemical evolution of tropical cooked peeled shrimp inoculated by Brochothrix thermosphacta and Lactococcus piscium CNCM I-4031 during storage at 8°C

This study investigated the sensory quality and physicochemical evolution (pH, glucose, l-lactic acid, biogenic amine, free amino-acids and volatile compounds) during storage at 8 °C of cooked peeled shrimp inoculated with the specific spoilage bacteria Brochothrix thermosphacta alone or mixed with the protective strain Lactococcus piscium CNCM I-4031. Growth of both bacteria was monitored at regular intervals during storage by microbial counts and the thermal temperature gradient gel electrophoresis (TTGE) technique. Bacterial counts showed that L. piscium and B. thermosphacta inoculated at 7 log CFU/g and 3 log CFU/g were well adapted to shrimp, reaching a maximum level of 9 log CFU/g after 4 days and 10 days respectively. In mixed culture, the growth of B. thermosphacta was reduced by 3.2 ± 0.1 log CFU/g. The TTGE technique allowed monitoring the colonisation of the strains on the shrimp matrix and confirming the dominance of L. piscium in mixed culture throughout the experiment. Sensory analysis confirmed that B. thermosphacta spoiled the product after 11 days, when its cell number attained 8 log CFU/g with the emission of strong butter/caramel off-odours. This sensory profile could be linked to the production of 2,3 butanedione, cyclopentanol, 3-methylbutanol, 3-methylbutanal, 2-methylbutanal, 4-methyl-3-chloro-3-pentanol and ethanol, which were produced in more significant quantities in the B. thermosphacta batch than in the batches in which the protective strain was present. On the contrary, TVBN and TMA were not suitable as quality indicators for B. thermosphacta spoilage activity. In the products where the protective L. piscium strain was present, no adverse effect on sensory quality was noted by the sensory panels. Moreover, biogenic amine assessment did not show any histamine or tyramine production by this strain, underlining its safety profile. Both strains produced lactic acid (1850 mg/kg in L. piscium and B. thermosphacta batch on days 3 and 10 respectively; 3830 mg/kg on day 7 in mixed culture) and the pH decrease from 6.6 ± 0.0 to 5.9 ± 0.1 was similar in all batches. Lactic acid production or competition for free amino-acid was not involved in the inhibition mechanism; however rapid glucose consumption by L. piscium could partially explain the growth limitation of the spoilage micro-organism. This study demonstrated the spoilage characteristic of B. thermosphacta and the usefulness of L. piscium as a bioprotective culture for tropical cooked peeled shrimp without any adverse effect on the sensory quality of the product.     

Impact of Host Immune Status on Discordant Anti-SARS-CoV-2 Circulating B Cell Frequencies and Antibody Levels

Individuals with pre-existing chronic systemic low-grade inflammation are prone to develop severe COVID-19 and stronger anti-SARS-CoV-2 antibody responses. Whether this phenomenon reflects a differential expansion of antiviral B cells or a failure to regulate antibody synthesis remains unknown. Here, we compared the antiviral B cell repertoire of convalescent healthcare personnel to that of hospitalized patients with pre-existing comorbidities. Out of 277,500 immortalized B cell clones, antiviral B cell frequencies were determined by indirect immunofluorescence screening on SARS-CoV-2 infected cells. Surprisingly, frequencies of SARS-CoV-2 specific clones from the two groups were not statistically different, despite higher antibody levels in hospitalized patients. Moreover, functional analyses revealed that several B cell clones from healthcare personnel with low antibody levels had neutralizing properties. This study reveals for the first time a key qualitative defect of antibody synthesis in severe patients and calls for caution regarding estimated protective immunity based only on circulating antiviral antibodies.